 |
- Equipped with servo motor to ensure stable running and precise positioning.
- Preform conveyor with sliding wheels.
- Clamping unit adopts hydro-pneumatic enhanced cylinder, thus mold closes at high speed but low pressure to reduce cycle time, or MOLD-LOCK at MOLD-CLOSE-END.
- Low power consumption while long service life.
- Control panel adopts touch LCD, easy operation with friendly interface.
- Multi-zone regulatable heating system to ensure heating equality for blow mold at best performance.
Typical Parts:
- Pneumatic related (cylinder, tube, tie-in), FESTO/Germany ;
Hydro-pneumatic enhanced cylinder, Italy ;
- Controller Controller (with Touch LCD), OMRON/Japan ;
- Inverter, OMRON/Japan
|
For further information:
Please contact us.
|
 |
 |
 |
| Model |
Speedster |
|
General
|
Heater Type |
Infrared |
| Capacity |
250ml: 3000 BPH
500ml: 2700-2800 BPH
1500ml: 2500-2600BPH |
| Bottle Vol. |
100ml ~ 1500ml |
| Cavity |
3 Cav. |
| Bottle Diameter |
<=95 mm |
| Outer Neck Diameter |
Dia.28-30 mm |
| Bottle Height |
<=330 mm |
|
Cooling Water |
Water Pressure |
5-6 Bar |
| Water Flow |
30 Ltr/min. |
| Temperature |
10-12
0C |
| Heat Consumption |
5400 Kcal/h |
|
Air |
Driving Air |
7Bar, 1.4m3/min. |
| Blowing Air |
35Bar, 3.0m3/min. |
|
Power |
Total Power |
67.5 Kw |
| Heater Power |
<=64 Kw |
|
Machine |
Dimension |
6.0x1.5x3.0 m |
| Weight |
3500 kgs |
|
Interface |
Air Inlet |
3/4",
20mm (Outer Screw) |
|
Delivery Time |
50 Days |
|
Payment Term |
30% T/T advance as
deposit, balance 70% by L/C at sight. |
|
|
